Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

161

162

163

164

165

166

167

168

169

170

Table Of Contents

To return to the default, use the no dot1x supplicant-timeout command.

Parameters

seconds Enter a time-out value in seconds. The range is from 1 to 300, where 300 is

implementation dependant. The default is 30.

Defaults 30 seconds

Command Modes INTERFACE

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

7.6.1.0 Introduced on the C-Series and S-Series.

7.4.1.0 Introduced on the E-Series.

dot1x tx-period

Configure the intervals at which EAPOL PDUs the Authenticator PAE transmits.

Syntax

dot1x tx-period seconds

To return to the default, use the no dot1x tx-period command.