Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

201

202

203

204

205

206

207

208

209

210

Table Of Contents

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

7.4.1.0 Added the monitor option.

6.1.1.0 Introduced on the E-Series.

Usage

Information

When you use the log option, the CP processor logs detail the packets that match. Depending on how

many packets match the log entry and at what rate, the CP may become busy as it has to log these

packets’ details.

NOTE: When you configure the ACL logging and byte counters simultaneously, byte counters may

display an incorrect value. Configure packet counters with logging instead.

Commands

● permit — configure a MAC address filter to pass packets.

● seq — configure a MAC address filter with a specified sequence number.

mac access-list extended

Name a new or existing extended MAC access control list (extended MAC ACL).

Syntax

mac access-list extended access-list-name [cpu-qos]

To delete a MAC access list, use the no mac access-list extended access-list-name

command.

Parameters

access-list-name

Enter a text string as the MAC access list name, up to 140 characters.

cpu-qos Enter the keywords cpu-qos to assign this ACL to control plane traffic only

(CoPP).

Defaults None

Command Modes CONFIGURATION