Service Manual

Version Description
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related
Commands
● match community — redistribute routes that match the COMMUNITY attribute.
● show ip bgp community — display BGP community groups.
set level
To specify the IS-IS level or OSPF area to which matched routes are redistributed, configure a filter.
Syntax
set level {backbone | level-1 | level-1-2 | level-2 | stub-area}
To remove a set level condition, use the no set level {backbone | level-1 | level-1-2 |
level-2 | stub-area} command.
Parameters
backbone Enter the keyword backbone to redistribute matched routes to the OSPF
backbone area (area 0.0.0.0).
level-1 Enter the keyword level-1 to redistribute matched routes to IS-IS Level 1.
level-1-2 Enter the keyword level-1-2 to redistribute matched routes to IS-IS Level 1 and
Level 2.
level-2 Enter the keyword level-2 to redistribute matched routes to IS-IS Level 2.
stub-area Enter the keyword stub to redistributed matched routes to OSPF stub areas.
Defaults Not configured.
Command Modes ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Dell Networking OS Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related
Commands
● set automatic-tag — compute the tag value of the route.
● set metric — specify the metric value assigned to redistributed routes.
232 Access Control Lists (ACL)