Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

341

342

343

344

345

346

347

348

349

350

Table Of Contents

Command Modes ROUTER BGP

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.7.1.0 Introduced on the C-Series.

neighbor allowas-in

Set the number of times an AS number can occur in the AS path.

Syntax

neighbor {ip-address | peer-group-name} allowas-in number

To return to the default value, use the no neighbor {ip-address | peer-group-name}

allowas-in command.

Parameters

ip-address

(OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.

peer-group-name

Enter the name of the peer group to set the advertisement interval for all routers in

the peer group.

number

Enter a number of times to allow this neighbor ID to use the AS path. The range is

from 1 to 10.

Defaults Not configured.