Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

401

402

403

404

405

406

407

408

409

410

Table Of Contents

Parameters

ipv4-address

ipv6-address

Enter the IP address of the neighbor on which you want to enable soft-

reconfiguration debugging.

peer-group-name

Enter the name of the peer group on which you want to enable soft-

reconfiguration debugging.

ipv6 unicast Debug soft reconfiguration for IPv6 unicast routes.

Defaults Disabled.

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

8.3.19.0 Introduced on the S4820T.

8.4.1.0 Added support for IPv4 multicast and IPv6 unicast routes.

7.8.1.0 Introduced on the S4810.

7.7.1.0 Introduced on the C-Series.

7.2.1.0 Introduced on the E-Series.

Usage

Information

This command turns on BGP soft-reconfiguration inbound debugging for IPv6 unicast routes. If no

neighbor is specified, debug is turned on for all neighbors.

ipv6 prefix-list

Configure an IPv6 prefix list.

Syntax

ipv6 prefix-list prefix-list name

Parameters

prefix-list name

Enter the name of the prefix list.

NOTE: There is a 140-character limit for prefix list names.

Defaults none

Command Modes CONFIGURATION