Service Manual

• show environment
• show inventory
• show login statistics
• show memory
• show processes cpu
• show processes ipc flow-control
• show processes memory
• show software ifm
• show system
• show tech-support
• ssh-peer-stack-unit
• telnet
• telnet-peer-stack-unit
• terminal length
• traceroute
• undebug all
• virtual-ip
• write
asf-mode
Enable alternate store and forward (ASF) mode and forward packets as soon as a threshold is reached.
Syntax
asf-mode stack-unit {unit-id | all} queue size
To return to standard Store and Forward mode, use the no asf-mode command.
Parameters
unit-id
Enter the stack member unit identifier of the stack member to reset. The range is from 1 to 6.
queue size Enter the queue size of the stack member. The range is from 0 to 15.
unit-id Enter the stack member unit identifier of the stack member to reset. The range is from 1 to 6.
queue size Enter the queue size of the stack member. The range is from 0 to 15.
Defaults
Not configured
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command
Line Reference Guide.
Control and Monitoring
81