Service Manual

Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Example
Pretend example here
Pretend example here
Pretend example here
Pretend example here
Pretend example here
Pretend example here
Usage Information
You must save the configuration and reload the system to implement ASF. When you enter the command, the system sends a
message stating that the new mode is enabled when the system reloads.
banner exec
Configure a message that is displayed when your enter EXEC mode.
Syntax
banner exec c line c
To delete a banner, use the no banner exec command.
Parameters
c Enter the keywords banner exec, then enter a character delineator, represented
here by the letter c. Press ENTER.
line Enter a text string for your banner message ending the message with your
delineator. In the following example, the delineator is a percent character (%); the
banner message is “testing, testing”.
Defaults No banner is displayed.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
82 Control and Monitoring