Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

941

942

943

944

945

946

947

948

949

950

Table Of Contents

other-config-flag

Enable the verification of the advertised other configuration parameter. If this command is not configured, the verification

process is bypassed.

Syntax

other-config-flag {on | off}

To reset the other configuration parameter, use the no other-config-flag {on | off}

command.

Parameters

on Enter the keyword on to set the other-config-flag value as ON.

off Enter the keyword off to set the other-config flag value as OFF.

Defaults None

Command Modes POLICY LIST CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.9(0.0) Introduced on the Z9500.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.

Commands

● ipv6 nd ra-guard enable — configure the RA guard related commands.

● ipv6 nd raguard policy policy-name — define the router advertisement (RA) guard policy name and

enter the RA guard policy configuration mode.

reachable-time

Enable the verification of the configured reachability time in the received RA packets.

Syntax

reachable—time value

To reset the advertised reachability time, use the no reachable-timevalue command.