Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

100

Table Of Contents

● ROUTER RIP

● ROUTER ISIS

● ROUTER BGP

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original command.

Commands

● end — returns to EXEC Privilege mode.

ftp-server enable

Enable FTP server functions on the system.

Syntax

ftp-server [vrf vrf-name] enable

Parameters

vrf

vrf-name

Enter the keyword vrf and then the name of the VRF to enable the FTP server to

listen to that VRF instance.

NOTE: Use this attribute to specify the VRF that is used by the FTP server to

accept client connections. If no VRF is specified, then the default VRF is used.

Defaults Disabled.

Command Modes CONFIGURATION