Service Manual

Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no Process ID is entered,
all OSPF processes are cleared.
vrf vrf-name Enter the keyword vrf and then the name of the VRF to clear all OSPF routing
tables corresponding to that VRF.
process (OPTIONAL) Enter the keyword process to reset the OSPF process.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
clear ip ospf statistics
Clear the packet statistics in interfaces and neighbors.
S4048–ON
Syntax
clear ip ospf [process-id] [vrf vrf-name] statistics [interface name
{neighbor router-id}]
Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no Process ID is entered,
all OSPF processes are cleared.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to clear all OSPF routing
tables corresponding to that VRF.
statistics Enter the keyword statistics to clear the packet statistics in interfaces and
neighbors.
interface name (OPTIONAL) Enter the keyword interface then one of the following interface
keywords and slot/port or number information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport] information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a VLAN, enter the keyword vlan then a number from 1 to 4094.
● For Port Channel groups, enter the keywords port-channel then a number.
Open Shortest Path First (OSPFv2 and OSPFv3) 975