Administrator Guide

OID String OID Name Description
NOTE: These OIDs only generate if
you enable the enable optic-
info-update-interval is
enabled command.
Hardware MIB Buffer Statistics
.1.3.6.1.4.1.6027.3.27.1.4 dellNetFpPacketBufferTable View the modular packet buffers details per
stack unit and the mode of allocation.
.1.3.6.1.4.1.6027.3.27.1.5 dellNetFpStatsPerPortTable View the forwarding plane statistics
containing the packet buffer usage per port
per stack unit.
.1.3.6.1.4.1.6027.3.27.1.6 dellNetFpStatsPerCOSTable View the forwarding plane statistics
containing the packet buffer statistics per
COS per port.
Troubleshooting Packet Loss
The show hardware stack-unit command is intended primarily to troubleshoot packet loss.
To troubleshoot packet loss, use the following commands.
•
show hardware stack-unit stack-unit-number cpu data-plane statistics
•
show hardware stack-unit stack-unit-number cpu party-bus statistics
•
show hardware stack-unit stack-unit-number drops unit unit-number
•
show hardware stack-unit stack-unit-number unit unit-number {counters | details | port-stats
[detail] | register | ipmc-replication | table-dump}
•
show hardware {ip | ipv6 | mac} {eg-acl | in-acl} stack-unit stack-unit-number port-set 0
pipeline 0-3
•
show hardware ip qos stack-unit stack-unit-number port-set 0
•
show hardware system-flow layer2 stack-unit stack-unit-number port-set 0 {counters | pipeline
0-3}
•
show hardware drops interface interface
•
show hardware buffer-stats-snapshot resource interface interface
•
show hardware buffer inteface interface{priority-group { id | all } | queue { id| all} }
buffer-info
•
show hardware buffer-stats-snapshot resource interface interface{priority-group { id | all } |
queue { ucast{id | all}{ mcast {id | all} | all}
•
show hardware drops interface interface
•
clear hardware stack-unit stack-unit-number counters
•
clear hardware stack-unit stack-unit-number unit 0-1 counters
•
clear hardware stack-unit stack-unit-number cpu data-plane statistics
•
clear hardware stack-unit stack-unit-number cpu party-bus statistics
Displaying Drop Counters
To display drop counters, use the following commands.
• Identify which stack unit and port pipe is experiencing internal drops.
show hardware stack-unit stack-unit-number drops [unit unit-number]
• Identify which interface is experiencing internal drops.
show hardware drops interface interface
1116
Debugging and Diagnostics