Administrator Guide

VmanQos : 0 0
EcfmAcl : 2 0
FcoeAcl : 4 0
iscsiOptAcl : 0 0
ipv4pbr : 0 0
vrfv4Acl : 0 0
Openflow : 0 0
fedgovacl : 0 0
nlbclusteracl: 0 0
Dell#
4 Create a UDF packet format in the UDF TCAM table.
CONFIGURATION mode
udf-tcam name seq number
Dell(conf)#udf-tcam ipnip seq 1
5 Configure a UDF ID to parse packet headers using the specified number of offset and required bytes.
CONFIGURATION-UDF TCAM mode
key description udf-id id packetbase PacketBase offset bytes length bytes
Dell(conf-udf-tcam)#key innerL3header udf-id 6 packetbase innerL3Header offset 0 length 2
6 View the UDF TCAM configuration.
CONFIGURATION-UDF TCAM mode
show config
Dell(conf-udf-tcam)#show config
!
udf-tcam ipnip seq 1
key innerL3header udf-id 6 packetbase innerL3Header offset 0 length 2
Dell(conf-udf-tcam)#
7 Configure the match criteria for the packet type in which UDF offset bytes are parsed.
CONFIGURATION-UDF TCAM mode
match l2ethertype ipv4 ipprotocol value vlantag tagStatus
Dell(conf-udf-tcam)#match l2ethertype ipv4 ipprotocol 4 vlantag any
8 View the UDF TCAM configuration.
CONFIGURATION-UDF TCAM mode
show config
Dell(conf-udf-tcam)#show config
!
udf-tcam ipnip seq 1
match l2ethertype ipv4 ipprotocol 4 vlantag any
Dell(conf-udf-tcam)#
9 Create a UDF qualifier to assign values to UDF IDs.
CONFIGURATION-UDF TCAM mode
udf-qualifier-value name
Dell(conf-udf-tcam)# udf-qualifier-value ipnip_val1
10 Assign a value to a UDF ID.
CONFIGURATION-UDF-Qualifier-Value Profile mode
Access Control Lists (ACLs)
141