Administrator Guide

The reachability time range is from 0 to 3,600,000 milliseconds.
14 Set the advertised retransmission time.
POLICY LIST CONFIGURATION mode
retrans—timer value
The retransmission time range is from 100 to 4,294,967,295 milliseconds.
15 Display the configurations applied on the RA guard policy mode.
POLICY LIST CONFIGURATION mode
show config
Example of the show config Command
Dell(conf-ra_guard_policy_list)#show config
!
ipv6 nd ra-guard policy test
device-role router
hop-limit maximum 251
mtu 1350
other-config-flag on
reachable-time 540
retrans-timer 101
router-preference maximum medium
trusted-port
Dell(conf-ra_guard_policy_list)#
Configuring IPv6 RA Guard on an Interface
To configure the IPv6 Router Advertisement (RA) guard on an interface, perform the following steps:
1 Configure the terminal to enter the Interface mode.
CONFIGURATION mode
interface interface-type slot/port
2 Apply the IPv6 RA guard to a specific interface.
INTERFACE mode
ipv6 nd ra-guard attach policy policy-name [vlan [vlan 1, vland 2, vlan 3.....]]
3 Display the configurations applied on all the RA guard policies or a specific RA guard policy.
EXEC Privilege mode
show ipv6 nd ra-guard policy policy-name
The policy name string can be up to 140 characters.
Example of the show ipv6 nd ra-guard policy Command
Dell#show ipv6 nd ra-guard policy test
ipv6 nd ra-guard policy test
device-role router
hop-limit maximum 1
match ra ipv6-access-list access
other-config-flag on
router-preference maximum medium
trusted-port
IPv6 Routing
467