Administrator Guide

AAA Authentication and Authorization for Roles
This section describes how to configure AAA Authentication and Authorization for Roles.
Configuration Task List for AAA Authentication and Authorization for Roles
This section contains the following AAA Authentication and Authorization for Roles configuration tasks:
• Configuring AAA Authentication for Roles
• Configuring AAA Authorization for Roles
• Configuring TACACS+ and RADIUS VSA Attributes for RBAC
Configure AAA Authentication for Roles
Authentication services verify the user ID and password combination. Users with defined roles and users with privileges are authenticated
with the same mechanism. There are six methods available for authentication: radius, tacacs+, local, enable, line, and none.
When role-based only AAA authorization is enabled, the enable, line, and none methods are not available. Each of these three methods
allows users to be verified with either a password that is not specific to their user ID or with no password at all. Because of the lack of
security these methods are not available for role only mode. When the system is in role-only mode, users that have only privilege levels are
denied access to the system because they do not have a role. For information about role only mode, see
Configuring Role-based Only AAA
Authorization.
NOTE
: Authentication services only validate the user ID and password combination. To determine which commands are
permitted for users, configure authorization. For information about how to configure authorization for roles, see Configure AAA
Authorization for Roles.
To configure AAA authentication, use the aaa authentication command in CONFIGURATION mode.
aaa authentication login {method-list-name | default} method [… method4]
Configure AAA Authorization for Roles
Authorization services determine if the user has permission to use a command in the CLI. Users with only privilege levels can use
commands in privilege-or-role mode (the default) provided their privilege level is the same or greater than the privilege level of those
commands. Users with defined roles can use commands provided their role is permitted to use those commands. Role inheritance is also
used to determine authorization.
Users with roles and privileges are authorized with the same mechanism. There are six methods available for authorization: radius,
tacacs+, local, enable, line, and none.
When role-based only AAA authorization is enabled, the enable, line, and none methods are not available. Each of these three
methods allows users to be authorized with either a password that is not specific to their userid or with no password at all. Because of the
lack of security, these methods are not available for role-based only mode.
To configure AAA authorization, use the aaa authorization exec command in CONFIGURATION mode. The aaa
authorization exec command determines which CLI mode the user will start in for their session; for example, Exec mode or Exec
Privilege mode. For information about how to configure authentication for roles, see
Configure AAA Authentication for Roles.
aaa authorization exec {method-list-name | default} method [… method4]
You can further restrict users’ permissions, using the aaa authorization command command in CONFIGURATION mode.
aaa authorization command {method-list-name | default} method [… method4]
826
Security