Administrator Guide

• flash1 — to boot from flash partition B.

• tftp://server-ip/image-file-name — to boot from the network.

4 Assign an IP address to the Management Ethernet interface.

uBoot mode

=> setenv ipaddr ip_address

For example, 10.16.150.105.

=> setenv netmask mask

For example, 255.255.0.0.

5 Assign an IP address as the default gateway for the system.

uBoot mode

=> setenv gatewayip gateway_ip_address

For example, 10.16.150.254.

6 Save the modified environmental variables.

uBoot mode

=> saveenv

7 Reload the system.

uBoot mode

reset

Management