Administrator Guide

MIB Object OID Description
dot3adAgg 1.2.840.10006.300.43.1.1
dot3adAggTable 1.2.840.10006.300.43.1.1.1 Contains information about every
Aggregator that is associated with a system.
dot3adAggEntry 1.2.840.10006.300.43.1.1.1.1 Contains a list of Aggregator parameters
and indexed by the ifIndex of the
Aggregator.
dot3adAggMACAddress 1.2.840.10006.300.43.1.1.1.1.1 Contains a six octet read–only value
carrying the individual MAC address
assigned to the Aggregator.
dot3adAggActorSystemPriority 1.2.840.10006.300.43.1.1.1.1.2 Contains a two octet read–write value
indicating the priority value associated with
the Actor’s system ID.
dot3adAggActorSystemID 1.2.840.10006.300.43.1.1.1.1.3 Contains a six octet read–write MAC
address value used as a unique identifier for
the system that contains the Aggregator.
dot3adAggAggregateOrIndividual 1.2.840.10006.300.43.1.1.1.1.4 Contains a read–only boolean value (True or
False) indicating whether the Aggregator
represents an Aggregate or an Individual
link.
dot3adAggActorAdminKey 1.2.840.10006.300.43.1.1.1.1.5 Contains a 16–bit read–write value which is
the current administrative key.
dot3adAggActorOperKey 1.2.840.10006.300.43.1.1.1.1.6 Contains a 16–bit read–write value which is
the operational key.
dot3adAggPartnerSystemID 1.2.840.10006.300.43.1.1.1.1.7 Contains a six octet read–only MAC address
value consisting of an unique identifier for
the current Protocol partner of the
Aggregator.
dot3adAggPartnerSystemPriority 1.2.840.10006.300.43.1.1.1.1.8 Contains a two octet read–only value that
indicates the priority value associated with
the Partner’s system ID.
dot3adAggPartnerOperKey 1.2.840.10006.300.43.1.1.1.1.9 Contains the current operational value of
the key for the Aggregator’s current
protocol partner.
dot3adAggCollectorMaxDelay 1.2.840.10006.300.43.1.1.1.1.10 Contains a 16–bit read–write attribute
defining the maximum delay, in tens of
microseconds, that may be imposed by the
frame collector between receiving a frame
from an Aggregator Parser, and either
delivering the frame to its MAC Client or
discarding the frame.
dot3adAggPortListTable 1.2.840.10006.300.43.1.1.2 Contains a list of all the ports associated
with each Aggregator. Each LACP channel
in a device occupies an entry in the table.
dot3adAggPortListEntry 1.2.840.10006.300.43.1.1.2.1 Contains a list of ports associated with a
given Aggregator and indexed by the
ifIndex of the Aggregator.
Simple Network Management Protocol (SNMP) 883