Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1011

show ipv6 mld snooping interface

View the configured MLD snooping interfaces.

Syntax

show ipv6 mld snooping interface [interface]

Parameters

interface

Enter the following keywords and slot/port or number information:

• For a Port Channel interface, enter the keywords port-channel then a number.

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then

the slot/port[/subport] information.

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/

port information.

• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.14(1.0) Updated the output to show both MLD versions 1 and 2.

9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,

S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.

Example

DellEMC# show ipv6 mld snooping interface vlan 100

Vlan 100 is up, line protocol is up

Interface address is fe80::211:33ff:fe44:7788/64

MLD protocol processing disabled

Current MLD snooping version is 1

MLD snooping is enabled on this interface

MLD snooping querier is disabled and is currently inactive

MLD snooping last member query response interval is 1000 ms

MLD snooping explicit tracking is disabled

show ipv6 mld snooping mrouter

Display information on the MLD snooping router.

Syntax

show ipv6 mld snooping mrouter [vlan]

Parameters

VLAN (OPTIONAL) Enter the keyword VLAN then the VLAN number to display the information

on that specific VLAN. The VLAN range is from 1 to 4094.

Defaults None.

Command Modes

EXEC

EXEC Privilege