Administrator Guide

(*, ff0e:225:0:1::1), uptime 18:01:56
Incoming interface: Null
Outgoing interface list:
Vlan 401
Vlan 1001
(2001:120:3:1::11, ff0e:225:0:1::1), uptime 18:02:03
Incoming interface: Vlan 401
Outgoing interface list:
Vlan 1001
(2001:130:3:1::11, ff0e:225:0:1::1), uptime 18:01:17
Incoming interface: Vlan 1001
Outgoing interface list:
Vlan 401
(2001:140:3:1::11, ff0e:225:0:1::1), uptime 18:01:13
Incoming interface: Vlan 1001
Outgoing interface list:
Vlan 401
Dell#
show ipv6 multicast-cam
Display the content addressable memory (CAM) size and the portions allocated for IP multicast traffic.
Syntax
show ipv6 multicast-cam [linecard slot-id | port-set port-pipe | stack-unit
unit-id]
Parameters
linecard slot-id Enter the keyword linecard with a slot id to select the line card for which to gather
information. The range of slot IDs is from 0 to 2.
port-set port-pipe Enter the keyword port-set with a port-pipe number to select the port pipe for which
to gather information. The range of port pipes is from 0 to 3.
stack-unit unit-id Enter the keyword stack-unit with a unit-id number to select the stack unit for which
to gather information.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
9.11.3.0 Introduced on the C9000, S3048–ON, S3100, S4048–ON, S4048T-ON, S6000–ON,
S6010–ON, S6100–ON and Z9100–ON.
Example
Dell# show ipv6 multicast-cam stack-unit 1 port-set 0
Group Address : ff0e::228:1:1
Source Address : 400::2
VRF : 1
VlanId : 4095
IPMC : 609
L2 Ports : -
L3 Ports : gi 1/10
Multicast 1041