Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

101

102

103

104

105

106

107

108

109

110

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC

Networking OS Command Line Reference Guide.

The following is a list of the Dell EMC Networking OS version history for this command.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.5.1.0 Added support for 4-port 40G line cards on ExaScale.

8.2.1.0 Increased number of VLANs on ExaScale to 4094 (was 2094).

8.1.1.0 Introduced on the E-Series ExaScale.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original command.

ip ftp username

Assign a user name for outgoing FTP connection requests.

Syntax

ip ftp username username

To return to anonymous FTP connections, use the no ip ftp username [username] command.

Parameters

username

Enter a text string as the user name up to 40 characters long.

Defaults No user name is configured.