Administrator Guide

Field Description
bdr: Displays the IP address of the Border Area Router.
Example
DellEMC# debug ip ospf 1 packet
OSPF process 90, packet debugging is on
DellEMC#
08:14:24 : OSPF(100:00):
Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1
aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Te 4/3 dst:224.0.0.5
netmask:255.255.255.0 pri:1 N-, MC-, E+, T-,
hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0
default-information originate
To generate a default external route into an OSPF routing domain, configure Dell EMC Networking Operating System (OS).
Syntax
default-information originate [always] [metric metric-value] [metric-type type-
value] [route-map map-name]
To return to the default values, use the no default-information originate command.
Parameters
always (OPTIONAL) Enter the keyword always to specify that default route information must
always be advertised.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number to configure a metric value for
the route. The range is from 1 to 16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then an OSPF link state type of 1 or 2
for default routes. The values are:
• 1 = Type 1 external route
• 2 = Type 2 external route
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established route
map.
Defaults Disabled.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Open Shortest Path First (OSPFv2 and OSPFv3) 1087