Administrator Guide
Version Description
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Introduced on the E-Series.
Usage Information Messages can contain an unlimited number of lines; however, each line is limited to 255 characters. To move to
the next line, use <CR>. To send the message use CTR-Z; to abort a message, use CTR-C.
service timestamps
To debug and log messages, add time stamps. This command adds either the uptime or the current time and date with local time zone
time difference included or excluded.
Syntax
service timestamps {debug | log} [datetime [localtime] [msec] [show-timezone]
[utc] | uptime]
To disable timestamping, use the no service timestamps [debug | log] command.
Parameters
datetime (OPTIONAL) Enter the keyword datetime to have the current time and date as in local
time zone added to the message.
debug (OPTIONAL) Enter the keyword debug to add timestamps to debug messages.
log (OPTIONAL) Enter the keyword log to add timestamps to log messages with severity
from 0 to 6.
localtime (OPTIONAL) Enter the keyword localtime to include the local time zone time in the
timestamp.
msec (OPTIONAL) Enter the keyword msec to include milliseconds in the timestamp.
show-timezone (OPTIONAL) Enter the keyword show-timezone to include the time zone information
in the timestamp.
uptime (OPTIONAL) Enter the keyword uptime to have the timestamp based on time elapsed
since system reboot.
utc (OPTIONAL) Enter the keyword utc to include the UTC time format (ignoring local time
zone) in the timestamp.
Defaults
• datetime [localtime]
• datetime
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(1.5) Added support for UTC time format.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
Control and Monitoring 123