Administrator Guide

Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information
The email addresses must have the standard form of <username>@<email system> to be considered valid.
This command is optional for SupportAssist service configuration.
Related
Commands
• preferred-method — configure the preferred method for contacting the person.
phone
Configure phone numbers to reach the contact person.
Syntax
phone primary phone [alternate phone]
To remove a phone number, use the no phone command. To remove the primary and alternate phone numbers,
use the
no phone primary and no phone alternate commands respectively.
Parameters
primary phone Enter the keyword primary then the primary phone number for the person.
alternate phone Enter the keyword alternate then the alternate phone number for the person.
Command Modes SUPPORTASSIST PERSON
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information
The phone numbers may contain country codes, area codes and extensions, if necessary. Allowable characters are
0 to 9, x, (, ), - and +.
This command is optional for SupportAssist service configuration.
Related
Commands
• preferred-method — configure the preferred method for contacting the person.
preferred-method
Configure the preferred method for contacting the person.
Syntax
preferred-method {email | no-contact | phone]
Parameters
email Enter the keyword email to specify email as preferred method.
no-contact Enter the keywords no-contact to specify that there is no preferred method.
phone Enter the keyword phone to specify phone as preferred method.
Defaults no-contact
Command Modes SUPPORTASSIST PERSON
SupportAssist 1599