Administrator Guide

Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information You can configure the MAC address of a VLT peer in a remote VLT domain to associate with the static VLT proxy
gateway and exclude a VLAN, or a range of VLANs, from proxy routing.
Example
DellEMC(conf)# vlt-domain 1
DellEMC(conf-vlt-domain#proxy-gateway static
DellEMC(conf-vlt-domain-proxy-gw-static)# remote-mac-address
00:01:e8:06:95:ac exclude-vlan 3
DellEMC(conf-vlt-domain-proxy-gw-static)#
peer-domain-link port-channel exclude-vlan
Configure the VLT port channel, which is connected to the remote VLT domain, for the proxy gateway or configure the VLANs you want
to exclude from VLT proxy gateway.
S4048–ON
Syntax
[no] peer-domain-link port-channel interface-identifier exclude-vlan vlan-range
Parameters
port-channel Configure the proxy-gateway interface port-channel.
interface-
identifier
Enter the interface type.
vlan-range
Enter the VLAN IDs that you want to exclude from the proxy gateway. The value can be a
single VLAN ID, comma-separated VLAN IDs, a range of VLAN IDs, or a combination. For
example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW LLDP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
1666 VLT Proxy Gateway