Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1681

show vlt inconsistency

Display run-time inconsistencies in the incoming interface (IIF) for spanned multicast routes (mroutes).

Syntax

show vlt inconsistency ip mroute

Command Modes EXEC

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.2(0.2) Introduced on the Z9000, S4810, and S4820T.

9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux

(PMUX) mode only.

9.0.2.0 Introduced on the S6000.

Example

DellEMC#show vlt inconsistency ip mroute

Spanned Multicast Routing IIF Inconsistency

Multicast Route LocalIIF PeerIIF

--------------- ---------- ---------

(22.22.22.200, 225.1.1.2) VLAN 5 VLAN 6

(*, 225.1.1.2) VLAN 15 te 1/5

DellEMC#

show vlt mismatch

Display mismatches in VLT parameters.