Administrator Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced support for Q-in-Q implementation over VLT on the S-Series and Z-Series. Introduced on the S6000-
ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux (PMUX) mode only.
9.0.2.0 Introduced on the S6000.
Example
DellEMC#show vlt mismatch
Domain
------
Parameters Local Peer
---------- ----- ----
Vlan-config
---------------------------------
Vlan-ID Local Mode Peer Mode
--------- ------------ ---------
20 L2 --
Vlan IPV4 Multicast Status
--------------------------
Vlan-ID Local Status Peer Status
-------- ------------ -----------
55 Inactive Active
1500 Inactive Active
VLT-VXLAN config
---------------
VLAN to VNI config mismatch
--------------------------------------
Vlan-ID Local VNID Peer VNID
--------- ------------ -----------
10 10 -
11 11 -
12 12 -
13 13
-
VXLAN enabled status on VLT Port Channels
-------------------------------------------
Local-Lag Status Peer-Lag Status
--------- -------- -------- --------
300 Disable 100 Disable
700 Enable 812 Disable
999 Disable 888
Disable
Local VTEP IP mismatch
-------------------------------------------------------------------
Local Node “Local VTEP IP” Remote Node “Local VTEP IP”
10.1.1.1 20.1.1.1
Remote VTEP Oper Status on VLT nodes
---------------------------------------------------------
Remote VTEP IP Local-Oper-Status Remote-Oper-Status
1684
Virtual Link Trunking (VLT)