Administrator Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related
Commands
vxlan-instance— Enable VXLAN Instance configuration on the platform.
gateway-ip
Configures gateway IP address on the platform.
Syntax
gateway-ip IP address
Parameters
IP address Enter the IP address of the gateway for the VXLAN instance.
Defaults Disabled
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related
Commands
vxlan-instance — Enable VXLAN Instance configuration on the platform.
local-vtep-ip
Set the local IP Address to be used as the source IP for VXLAN tunnels.
Syntax
local-vtep-ip IP Address
To disable the settings, use the no local-vtep-ip command.
Parameters
IP Address Enter the local IP Address to be used as a source for VXLAN tunnels.
Defaults None.
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Virtual Extensible LAN (VXLAN) 1697