Administrator Guide

Controller Mode:
DellEMC#show running-config vxlan
!
feature vxlan
!
vxlan-instance 1
gateway-ip 3.3.3.3
fail-mode secure
controller 1 192.168.122.6 port 6632 ssl
no shutdown
Related
Commands
vxlan-instance- Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance
Displays information related to Network Virtualization Overlay (NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, and Z9100–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S6000.
Example
DellEMC#show vxlan vxlan-instance 1
Instance : 1
Admin State : enabled
Management IP : 192.168.200.200
Gateway IP : 3.3.3.3
MAX Backoff : 30000
Controller 1 : 192.168.122.6:6632 ssl (connected)
Fail Mode : secure
Port List :
Fo 1/49 Te 1/16 Te 1/20 Po 2
Related
Commands
vxlan-instance- Enable VXLAN Instance configuration on the platform.
Virtual Extensible LAN (VXLAN) 1705