Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1701

name

(Optional) Enter the name of VXLAN logical network with a maximum length of 30

characters.

vnid

VNID

(Optional) Enter the keyword vnid and enter the ID of the VXLAN. The range is from 1

to 16777215.

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.13(0.0) Updated to show VLT peer’s local macs.

9.11(0.0) Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON,

S6100–ON, and Z9100–ON.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S6100–ON.

Introduced on the Z9100–ON.

9.8(0.0) Introduced on the S4048–ON.

9.7(0.0) Introduced on the S6000-ON.

9.4.(0.0) Introduced on the S6000.

Example

DellEMC#show vxlan vxlan-instance <1> unicast-mac-local

Total Local Mac Count: 1

VNI MAC PORT VLAN

100 00:00:00:33:33:33 Te 0/0 100

100 00:00:00:33:33:34 (N) Po 128 100

Commands

vxlan-instance- Enable VXLAN Instance configuration on the platform.

show vxlan vxlan-instance unicast-mac-remote

Displays the information of the remote unicast MACs associated with the logical network related to Network Virtualization Overlay (NVO)

Gateway.

Syntax

show vxlan vxlan-instance instance ID unicast-mac-remote [logical-network name

| vnid VNID]

Parameters

instance ID

Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial

release.