Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

261

262

263

264

265

266

267

268

269

270

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

Example

DellEMC(conf-nprefixl)# show config

ip prefix-list PL_OSPF_to_RIP

seq 5 permit 1.1.1.0/24

seq 10 deny 2.1.0.0/16 ge 23

seq 25 permit 192.0.0.0 bitmask 192.0.0.0

DellEMC(conf-nprefixl)#

show route-map

Display the current route map configurations.

Syntax

show route-map [map-name]

Parameters

map-name

(OPTIONAL) Enter the name of a configured route map, up to 140 characters.

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.