Administrator Guide

Usage Information To apply the AS-PATH ACL to BGP routes, use the match as-path or neighbor filter-list
commands.
Example
DellEMC(conf)# ip as-path access-list TestPath
DellEMC(config-as-path)#
Related
Commands
• match as-path — match on routes contain a specific AS-PATH.
show ip as-path-access-lists
Display the all AS-PATH access lists configured on the E-Series.
Syntax
show ip as-path-access-lists
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
pre-Version 6.1.1.0 Introduced on the E-Series.
Example
DellEMC# show ip as-path-access-lists
ip as-path access-list acc
permit 750
deny 10
DellEMC#
IP Community List Commands
IP community list commands are supported on the Dell EMC Networking OS.
ip community-list
Enter COMMUNITY-LIST mode and create an IP community-list for BGP.
Syntax
ip community-list comm-list-name
To delete a community-list, use the no ip community-list comm-list-name command.
Parameters
comm-list-name Enter a text string as the name of the community-list, up to 140 characters.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
264 Access Control Lists (ACL)