Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

481

482

483

484

485

486

487

488

489

490

• For ON platforms, you can specify multiple ports as slot/port/[subport] - slot/port/

[subport]. For example, if you want to display information corresponding to all ports between 1 and 4,

specify the port range as show interfaces interface-type 1/1/1 - 1/1/4.

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S6100-ON.

9.9(0.0) Added support to display the interface configurations corresponding to a range of ports.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON and Z9500.

9.0.2.0 Introduced on the S6000.

9.2(0.2) Down status messages added.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.

Example

(Summary)

DellEMC# show interface te 1/3 ets de

Interface TenGigabitEthernet 1/3

Max Supported TC Groups is 4

Number of Traffic Classes is 8

Admin mode is on

Admin Parameters :

------------------

Admin is enabled

TC-grp Priority# Bandwidth TSA

------------------------------------------------

0 - -

1 0,1,2 100% ETS

2 3 0 % SP

3 4,5,6,7 0 % SP

4 - -

5 - -

6 - -

7 - -

Remote Parameters :

-------------------

Remote is disabled

Local Parameters :