Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

491

492

493

494

495

496

497

498

499

500

show stack-unit stack-ports ets details

Displays the ETS configuration applied to egress traffic on stacked ports, including ETS Operational mode on each unit and the

configurated priority groups with dot1p priorities, bandwidth allocation, and scheduler type.

Syntax

show stack-unit {all | stack-unit} stack-ports {all | port-number} ets details

Parameters

stack-unit

Enter the stack unit identification.

port-number

Enter the port number.

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.

Example

(Summary)

Dell(conf)# show stack-unit all stack-ports all ets details

Stack unit 1 stack port all

Max Supported TC Groups is 4

Number of Traffic Classes is 1

Admin mode is on

Admin Parameters:

--------------------

Admin is enabled

TC-grp Priority# Bandwidth TSA

------------------------------------------------

0 0,1,2,3,4,5,6,7 100% ETS

1 - -

2 - -

3 - -

4 - -

5 - -

6 - -

7 - -

8 - -

Stack unit 2 stack port all