Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

621

622

623

624

625

626

627

628

629

630

Version Description

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on C-Series, E-Series, and S-Series

Commands

• disable — globally disable GVRP.

gvrp registration

Configure the GVRP register type.

Syntax

gvrp registration {fixed | normal | forbidden}

To return to the default, use the gvrp register normal command.

Parameters

fixed Enter the keyword fixed then the VLAN range in a comma-separated VLAN ID set.

normal Enter the keyword normal then the VLAN range in a comma-separated VLAN ID set.

This setting is the default.

forbidden Enter the keyword forbidden then the VLAN range in a comma-separated VLAN ID

set.

Defaults normal

Command Modes CONFIGURATION-INTERFACE

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.