Administrator Guide

Unit Nvram Config
------------------------
1 Success
2 Success
3 Success
4 Not present
5 Not present
Power-cycling the unit(s).
DellEMC#
Example (NvRAM,
single unit)
DellEMC# restore factory-defaults stack-unit 1 nvram
**************************************************************
* Warning - Restoring factory defaults will delete the existing *
* persistent settings (stacking, fanout, etc.) *
* After restoration the unit(s) will be powercycled immediately. *
* Proceed with caution ! *
**************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram Config
------------------------
1 Success
Power-cycling the unit(s).
DellEMC#
show boot system
Displays information about boot images currently configured on the system.
Syntax
show boot system stack-unit{stack-unit—id | all}
Parameters
all Enter the keyword all to display the boot image information for all stack units.
stack-unit-id Enter the stack-unit-id to display boot image information for a stack-unit.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000
File Management 71