Concept Guide
MIB Object OID Access or Permission Description
dellNetPortSecIfStationMoveEn
able
1.3.6.1.4.1.6027.3.31.1.2.1.1.5 read-write Enable or disable station movement on
the dynamically secured MAC addresses
learnt on the interface.
dellNetPortSecIfSecureMacViola
tionAction
1.3.6.1.4.1.6027.3.31.1.2.1.1.6 read-write Determines the action to be taken when
MAC limit violation occurs in the system.
dellNetPortSecIfStmvViolationA
ction
1.3.6.1.4.1.6027.3.31.1.2.1.1.7 read-write Determines the action to be taken when
either dynamic or static MAC limit
violation occurs in the system.
dellNetPortSecIfStickyEnable 1.3.6.1.4.1.6027.3.31.1.2.1.1.8 read-write Enables or disables sticky port security
feature on this interface.
dellNetPortSecIfClearSecureMa
cAddresses
1.3.6.1.4.1.6027.3.31.1.2.1.1.9 read-write Deletes secure MAC addresses based on
the specied type.
dellNetPortSecIfResetViolationS
tatus
1.3.6.1.4.1.6027.3.31.1.2.1.1.10 read-write Resets the violation status of an
interface based on the specied type.
dellNetPortSecIfSecureMacAge
Enable
1.3.6.1.4.1.6027.3.31.1.2.1.1.11 read-write Enables aging of the dynamically
secured MAC addresses learnt on the
interface.
Enabling and viewing SNMP for port security
To enable or view DELL-NETWORKING-PORT-SECURITY-MIB, congure snmp-server in read-write mode using the snmp-server
community public rw
command. You can enable the port security feature on the Dell EMC Networking OS using the snmpset
command. Also, you can view if the port security feature is enabled or disabled using the snmpwalk command.
To congure dellNetPortSecIfSecureMacLimit as 100 on an interface whose ifIndex is 2101252, use the following command.
snmpset –v 2c –c public 10.16.129.26 1.3.6.1.4.1.6027.3.31.1.2.1.1.3. 2101252 i 100
To remove dellNetPortSecIfSecureMacLimit conguration on an interface whose ifIndex is 2101252, use the following
command.
snmpset –v 2c –c public 10.16.129.26 1.3.6.1.4.1.6027.3.31.1.2.1.1.3. 2101252 i 2147483647
To retrieve dellNetPortSecIfSecureMacLimit congured on an interface whose ifIndex is 2101252, use the following command.
snmpwalk -v 2c -c public 10.16.129.26 1.3.6.1.4.1.6027.3.31.1.2.1.1.3. 2101252
SNMPv2-SMI::enterprises.6027.3.31.1.2.1.1.3. 2101252 = INTEGER: 10
MIB objects for conguring MAC addresses
This section describes about the MIB objects dellNetPortSecSecureStaticMacAddrTable to congure and un-congure static
MAC addresses in the system. The OID of this MIB table is 1.3.6.1.4.1.6027.3.31.1.2.2.
The table is indexed by the following parameters:
• MAC Address (Octet string of length 6 and MAC address ( in decimal) as value
• VLAN ID
• Interface Index
Simple Network Management Protocol (SNMP)
961