Connectivity Guide

member (zoneset)
Adds zones to an existing zoneset.
Syntax
member zone-name
Parameters zone-name — Enter an existing zone name.
Defaults Not congured
Command Mode Zoneset CONFIGURATION
Usage Information
The no version of this command removes the zone from the zoneset.
Example
OS10(config)# fc zoneset set
OS10(conf-fc-zoneset-set)# member hba1
Supported Releases 10.3.1E or later
show fc alias
Displays the details of a FC alias and its members.
Syntax
show fc alias [alias-name]
Parameters alias-name — (Optional) Enter the FC alias name.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show fc alias
Alias Name Alias Member
==============================================
test 21:00:00:24:ff:7b:f5:c9
20:25:78:2b:cb:6f:65:57
OS10#
Supported Releases 10.3.1E or later
show fc interface-area-id mapping
Displays the FC ID to interface mapping details.
Syntax
show fc interface-area-id mapping
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
144 Fibre Channel