Connectivity Guide

Parameters
• vfabric-ID — Enter the vfabric ID.
• fibrechannel — Enter the bre channel interface name.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# clear fc statistics vfabric 100
OS10# clear fc statistics interface fibrechannel1/1/25
Supported Releases 10.4.1.0 or later
fcoe
Adds FCoE parameters to the vfabric.
Syntax
fcoe {fcmap fc-map | fcf-priority fcf-priority-value | fka-adv-period adv-
period | vlan-priority vlan-priority-value | keep-alive}
Parameters
• fc-map — Enter the FC map ID, from 0xefc00 to 0xefcff.
• fcf-priority-value — Enter the FCF priority value, from 1 to 255.
• adv-period — Enter the FCF keepalive advertisement period, from 8 to 90 seconds.
• vlan-priority-value — Enter the VLAN priority value, from 0 to 7.
Defaults
• fcmap—0x0EFC00
• fcf-priority—128
• fka-adv-period—8
• vlan-priority—3
• keep-alive—True
Command Mode Vfabric CONFIGURATION
Usage Information
The no version of this command disables the FCoE parameters.
Example
OS10(config)# vfabric 10
OS10(conf-vfabric-10)# name 10
OS10(conf-vfabric-10)# fcoe fcmap 0x0efc01
OS10(conf-vfabric-10)# fcoe fcf-priority 128
OS10(conf-vfabric-10)# fcoe fka-adv-period 8
OS10(conf-vfabric-10)# fcoe vlan-priority 3
Supported Releases 10.3.1E or later
name
Congures a vfabric name.
Syntax
name vfabric-name
150 Fibre Channel