Connectivity Guide

Parameters vfabric-name — Enter a name for the vfabric.
Defaults Not congured
Command Mode Vfabric CONFIGURATION
Usage Information
The no version of this command removes the vfabric name..
Example
OS10(config)# vfabric 100
OS10(conf-vfabric-100)# name test_vfab
Supported Releases 10.3.1E or later
show fc statistics
Displays the FC statistics.
Syntax
show fc statistics {vfabric vfabric-ID | interface fibrechannel}
Parameters
• vfabric-ID — Enter the vfabric ID.
• fibrechannel — Enter the Fibre Channel interface name.
Default Not congured
Command Mode EXEC
Usage Information None
Example (vfabric)
OS10# show fc statistics vfabric 100
Number of FLOGI : 43
Number of FDISC : 6
Number of FLOGO : 0
Number of FLOGI Accepts : 43
Number of FLOGI Rejects : 0
Number of FDISC Accepts : 6
Number of FDISC Rejects : 0
Number of FLOGO Accepts : 0
Number of FLOGO Rejects : 0
Example (interface)
OS10# show fc statistics interface fibrechannel1/1/25:1
Number of FLOGI : 1
Number of FDISC : 0
Number of FLOGO : 0
Number of FLOGI Accepts : 1
Number of FLOGI Rejects : 0
Number of FDISC Accepts : 0
Number of FDISC Rejects : 0
Number of FLOGO Accepts : 0
Number of FLOGO Rejects : 0
Supported Releases 10.3.1E or later
show fc switch
Displays FC switch parameters.
Syntax
show fc switch
Fibre Channel 151