Connectivity Guide

Congure TTL
OS10(config)# lldp holdtime-multiplier 2
Return multiplier value
OS10(config)# no lldp holdtime-multiplier
LLDP commands
clear lldp counters
Clears LLDP and LLDP-MED transmit, receive, and discard statistics from all physical interfaces.
Syntax
clear lldp counters
Parameters None
Default Not congured
Command Mode EXEC
Usage Information The counter default value resets to zero for all physical interfaces.
Example
OS10# clear lldp counters
Supported Releases 10.2.0E or later
clear lldp table
Clears LLDP neighbor information for all interfaces.
Syntax
clear lldp table
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Neighbor information clears on all interfaces.
Example
OS10# clear lldp table
Supported Releases 10.2.0E or later
lldp enable
Enables or disables LLDP globally.
Syntax
lldp enable
Parameters None
Default Enabled
Command Mode CONFIGURATION
Layer 2 203