Connectivity Guide

show lldp tlv-select interface
Displays the TLVs enabled for an interface.
Syntax
show lldp tlv-select interface ethernet node/slot/port[:subport]
Parameters ethernet node/slot/port[:subport] — Enter the Ethernet interface information, from 1 to 253.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show lldp tlv-select interface ethernet 1/1/4
port-description
system-name
system-description
system-cababilities
management-address
port-vlan
mac-phy-config
link-aggregation
max-frame-size
Supported Releases 10.2.0E or later
show lldp trac
Displays LLDP trac information including counters, packets transmitted and received, discarded packets, and unrecognized TLVs.
Syntax
show lldp traffic [interface ethernet node/slot/port[:subport]]
Parameters interface ethernet node/slot/port[:subport] — (Optional) Enter the Ethernet interface
information to view the LLDP trac.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show lldp traffic
LLDP Traffic Statistics:
Total Frames Out : 1504
Total Entries Aged : 2
Total Frames In : 67
Total Frames Received In Error : 0
Total Frames Discarded : 0
Total TLVS Unrecognized : 0
Total TLVs Discarded : 0
Example (Interface)
OS10# show lldp traffic interface ethernet 1/1/2
LLDP Traffic Statistics:
Total Frames Out : 45
Total Entries Aged : 1
Total Frames In : 33
Total Frames Received In Error : 0
Total Frames Discarded : 0
Total TLVS Unrecognized : 0
Total TLVs Discarded : 0
Layer 2 213