Connectivity Guide

Usage Information Enter the ip vrf management command only in non-transaction-based conguration mode. Do not use
transaction-based mode. The no version of this command removes the management VRF instance conguration.
Example
OS10(config)# ip vrf management
OS10(conf-vrf)#
Supported Releases 10.4.0E(R1) or later
show hosts vrf
Displays the host table in the management or non-default VRF instance.
Syntax
show hosts vrf {management | vrf-name}
Parameters
• management—Enter the keyword management to display the host table in the management VRF instance.
• vrf-name—Enter the name of the non-default VRF instance to display the host table in that VRF instance.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show hosts vrf management
Default Domain Name : dell.com
Domain List : abc.com xyz.net
Name Servers : 10.16.126.1
=================================================
Static Host to IP mapping Table
=================================================
Host IP-Address
-------------------------------------------------
google.com 172.217.160.142
yahoo.com 98.139.180.180
Supported Releases 10.4.0E(R1) or later
show ip vrf
Displays the VRF instance information.
Syntax
show ip vrf [management | vrf-name]
Parameters
• management—Enter the keyword management to display information corresponding to the management
VRF instance.
• vrf-name—Enter the name of the non-default VRF instance to display information corresponding to that
VRF instance.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show ip vrf
VRF-Name Interfaces
default Mgmt1/1/1
Eth1/1/1-1/1/2
Layer 3 299