Connectivity Guide

show ip ospf database opaque-link
Displays information about the opaque-link Type 9 LSA.
Syntax
show ip ospf [process-id] [vrf vrf-name] database opaque-link
Parameters
• process-id — (Optional) Displays the opaque-link Type 9 LSA information for an OSPF process ID. If you do
not enter a process ID, this command applies only to the rst OSPF process.
• vrf vrf-name — (Optional) Displays the opaque-link Type 9 LSA information for an OSPF process ID
corresponding to a VRF.
Default Not congured
Command Mode EXEC
Usage Information
• LS Age — Displays the LS age.
• Options — Displays the optional capabilities available on the router.
• LS Type — Displays the LS type.
• Link State ID — Identies the router ID.
• Advertising Router — Identies the advertising router’s ID.
• LS Seq Number — Identies the LS sequence number. This identies old or duplicate LSAs.
• Checksum — Displays the Fletcher checksum of an LSA’s complete contents.
• Length — Displays the LSA length in bytes.
• Opaque Type — Identies the Opaque type eld, the rst 8 bits of the LS ID.
• Opaque ID — Identies the Opaque type-specic ID, the remaining 24 bits of the LS ID.
Example
OS10# show ip ospf 100 database opaque-link
OSPF Router with ID (1.1.1.1) (Process ID 100)
Type-9 Link Local Opaque (Area 0.0.0.1)
LS age: 3600
Options: (No TOS-Capability, No DC)
LS type: Type-9 Link Local Opaque
Link State ID: 8.1.1.1
Advertising Router: 2.2.2.2
LS Seq Number: 0x80000007
Checksum: 0x9DA1
Length: 28
Opaque Type: 8
Opaque ID: 65793
Supported Releases 10.2.0E or later
show ip ospf database router
Displays information about the router Type 1 LSA.
Syntax
show ip ospf process-id [vrf vrf-name] database router
Parameters
• process-id — (Optional) Displays the router Type 1 LSA for an OSPF process ID. If you do not enter a
process ID, this command applies only to the rst OSPF process.
• vrf vrf-name — (Optional) Displays the router Type 1 LSA for an OSPF process ID corresponding to a VRF.
Layer 3 461