Connectivity Guide

Example
OS10(conf-eth1/1/5-vrid-254)# priority 200
Supported Releases 10.2.0E or later
show vrrp
Displays VRRP group information.
Syntax
show vrrp [vrf vrf-name] {brief | vrrp-id | ipv6 group-id}
Parameters
• vrf vrf-name — Displays the VRRP group information corresponding to the specied VRF.
• brief — Displays the conguration information for all VRRP instances in the system.
• vrrp-id — Enter a VRRP group ID number to view the VRRP IPv4 group operational status information,
from 1 to 255.
• ipv6 group-id — (Optional) Enter a VRRP group ID number to view the specic IPv6 group operational
status information, from 1 to 255.
Default All IPv4 VRRP group conguration
Command Mode EXEC
Usage Information Displays all active VRRP groups. If no VRRP groups are active, the system displays No Active VRRP group.
Example (Brief)
OS10 # show vrrp brief
Interface Group Priority Preemption State Master-addr Virtual addr(s)
---------------------------------------------------------------------
ethernet1/1/1 1 200 true master-state 10.1.1.1 10.1.1.1
Example (IPv6)
OS10 # show vrrp ipv6 1
Interface : ethernet1/1/1 IPv6 VRID : 1
Primary IP Address : 10::1 State : master-state
Virtual MAC Address : 00:00:5e:00:02:01
Version : version-3 Priority : 200
Preempt : Hold-time :
Authentication : no-authentication
Virtual IP address :
10::1
master-transitions : 1 advertise-rcvd : 0
advertise-interval-errors : 0 ip-ttl-errors : 0
priority-zero-pkts-rcvd : 0 priority-zero-pkts-sent : 0
invalid-type-pkts-rcvd : 0 address-list-errors : 0
pkt-length-errors : 0
Supported Releases 10.2.0E or later
track
Assigns a unique identier to track an object.
Syntax
track track-id [priority cost [value]]
Parameters
• track-id — Enter the object tracking resource ID number, from 1 to 500.
• priority cost value — (Optional) Enter a cost value to subtract from the priority value, from 1 to 254.
Default 10
510 Layer 3