Connectivity Guide

User session management commands
exec-timeout
Congure timeout in seconds for all the user sessions.
Syntax
exec-timeout timeout-value
Parameters timeout-value — Enter the timeout value in seconds, from 0 to 3600.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command disables the timeout.
Example
OS10(config)# exec-timeout 300
OS10(config)#
Supported Releases 10.3.1E or later
kill-session
Terminate a user session.
Syntax
kill-session session-ID
Parameters session-ID — Enter the user session ID.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# kill-session 3
Supported Releases 10.3.1E or later
show sessions
Displays the active management sessions.
Syntax
show sessions
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use this command to view information about the active user management sessions.
Example
OS10# show sessions
Current session's operation mode: Non-transaction
Session-ID User In-rpcs In-bad-rpcs Out-rpc-err Out-notify Login-time Lock
-----------------------------------------------------------------------------------------
System management 611