Connectivity Guide

ip ssh server password-authentication
Enable password authentication in an SSH server.
Syntax
ip ssh server password-authentication
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage Information The no version of this command disables the password authentication.
Example
OS10(config)# ip ssh server password-authentication
Supported Releases 10.3.0E or later
ip ssh server port
Congure the SSH server listening port.
Syntax
ip ssh server port port-number
Parameters port-number — Enter the listening port number, from 1 to 65535.
Default 22
Command Mode CONFIGURATION
Usage Information The no version of this command removes the conguration.
Example
OS10(config)# ip ssh server port 255
Supported Releases 10.3.0E or later
ip ssh server pubkey-authentication
Enable public key authentication in an SSH server.
Syntax
ip ssh server pubkey-authentication
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage Information The no version of this command disables the public key authentication.
Example
OS10(config)# ip ssh server pubkey-authentication
Supported Releases 10.3.0E or later
628 System management