Connectivity Guide

show snmp community
Displays the SNMP communities congured on the switch.
Syntax
show snmp community
Parameters None
Defaults None
Command Mode EXEC
Usage Information To congure an SNMP community, use the snmp-server community command.
Example
OS10# show snmp community
Community : public
Access : read-only
Community : dellOS10
Access : read-write
ACL : dellacl
Supported Releases 10.4.2.0 or later
show snmp engineID
Displays the SNMP engine ID on the switch or on remote devices that access the SNMP agent on the switch.
Syntax
show snmp engineID {local | remote}
Parameters
• local — Display the local engine ID.
• remote — Display the SNMP engine ID of remote devices congured on the switch.
Defaults None
Command Mode EXEC
Usage Information To congure the local engine ID or the engine ID for a remote device, use the snmp-server engineID
command.
Example
OS10# show snmp engineID remote
Remote Engine ID IP-addr Port
0x0712 1.1.1.1 23
OS10# show snmp engineID local
Local default SNMP engineID: 0x80001f880390b11cf4abe7
Supported Releases 10.4.2.0 or later
show snmp group
Displays the SNMP groups congured on the switch, including SNMP views and security models.
Syntax
show snmp group
Parameters None
644 System management