Connectivity Guide

Command Mode EXEC
Usage Information Use this command to congure the location of the OS10 image used to reload the software at boot time. Use the
show boot command to view the congured next boot image. This command applies immediately and does not
require the commit command.
Example
OS10# boot system standby
Supported Releases 10.2.0E or later
image cancel
Cancels an active image download.
Syntax
image cancel
Parameters None
Default Not congured
Command Mode EXEC
Usage Information This command attempts to cancel an active le download in progress.
Example
OS10# image cancel
Supported Releases 10.2.0E or later
image copy
Copies the entire image in the active partition to the standby partition, a mirror image.
Syntax
image copy active-to-standby
Parameters active-to-standby — Enter to copy the entire image in the active partition to the standby partition, a mirror
image.
Default Not congured
Command Mode EXEC
Usage Information Duplicate the active, running software image to the standby image location.
Example
OS10# image copy active-to-standby
Supported Releases 10.2.0E or later
image download
Downloads a new software image to the local le system.
Syntax
image download file-url
Parameters file-url — Set the path to the image le:
• ftp://userid:passwd@hostip:/filepath — Enter the path to copy from the remote FTP server.
• http[s]://hostip:/filepath — Enter the path to copy from the remote HTTP or HTTPS server.
System management 655