Connectivity Guide

show iscsi
Displays currently congured iSCSI settings.
Syntax
show iscsi
Parameters None
Command Mode EXEC
Usage Information This command output displays global iSCSI conguration settings. To view target and initiator information use the
show iscsi session command.
Example
OS10# show iscsi
iSCSI Auto configuration is Enabled
iSCSI session monitoring is Enabled
iSCSI COS qos-group 4 remark dot1p 4
Session aging time 15
Maximum number of connections is 100
Port IP Address
------------------------
3260
860
3261 10.1.1.1
Supported Releases 10.3.0E or later
show iscsi session
Displays information about active iSCSI sessions.
Syntax
show iscsi session [detailed]
Parameter detailed — Displays a detailed version of the active iSCSI sessions.
Command Mode EXEC
Usage Information In an iSCSI session, Target is the storage device, and Initiator is the server connected to the storage device.
Example
OS10# show iscsi session
Example (detailed)
OS10# show iscsi session detailed
Session 1
------------------------------------------------
Target:iqn.2001-05.com.equallogic:0-8a0906-00851a00c-98326939fba510a1-517
Initiator:iqn.1991-05.com.microsoft:win-rlkpjo4jun2
Up Time:00:00:18:12(DD:HH:MM:SS)
Time for aging out:29:23:59:35(DD:HH:MM:SS)
ISID:400001370000
Initiator Initiator Target Target Connection
IP Address TCP Port IP Address TCP Port ID
----------------------------------------------------------
10.10.10.210 54748 10.10.10.40 3260 1
Session 2
------------------------------------------------
Target:iqn.2001-05.com.equallogic:0-8a0906-01251a00c-8ab26939fbd510a1-518
Initiator:iqn.1991-05.com.microsoft:win-rlkpjo4jun2
Up Time:00:00:16:02(DD:HH:MM:SS)
Time for aging out:29:23:59:35(DD:HH:MM:SS)
ISID:400001370000
Initiator Initiator Target Target Connection
898 Converged data center services