Setup Guide

Figure 7. Two-post ush-mount conguration

2 Attach one rail to the front post ange with two user-supplied screws, item 2.

3 Slide the plunger bracket forward against the vertical post and secure the plunger bracket to the post ange with two user-supplied

screws. Refer to item 3.

4 Repeat this procedure for the second rail.

Two-post center-mount conguration

CAUTION

: Your switch is not NEBS Earthquake Z4-compliant if you use this installation method.

1 Slide the plunger bracket rearward until it clicks into place and secure the bracket to the front post ange with two user-supplied

screws, item 1.

S4048–ON installation