Concept Guide

advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description
multiplier 5
no disable
R1(conf-lldp)#
no multiplier
R1(conf-lldp)#show config
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description
no disable
R1(conf-lldp)#
Debugging LLDP
You can view the TLVs that your system is sending and receiving.
To view the TLVs, use the following commands.
• View a readable version of the TLVs.
debug lldp brief
• View a readable version of the TLVs plus a hexadecimal version of the entire LLDPDU, including unrecognized TLVs.
debug lldp detail
To stop viewing the LLDP TLVs sent and received by the system, use the no debug lldp command.
Figure 85. The debug lldp detail Command — LLDPDU Packet Dissection
Example of debug lldp Command Output with Unrecognized Reserved and Organizational Specic LLDP TLVs
580
Link Layer Discovery Protocol (LLDP)